Features
New Loader Joystick
Redesigned for maximum comfort, the all new loader joystick fits perfectly in your hand while also being positioned closer to the operator for easier operation. The joystick also features transmission controls for changing the direction of the tractor, as well as the ability to shift up and down through the powershift gears. The operator has full control of the tractor with one hand on the wheel and one on the joystick.
Xpress Restart
With the new Xpress Restart, driving has never been easier so beginners can move as quickly as the pros. This feature gives the operator the ability to come to a stop using only the brake, no clutch pedal required.
Stationary PTO
Operators can run the rear PTO from both inside or outside the cab. This feature is great for your busy operator using grain augers, feed mixers and more.
Shuttle Shift Modulation
Enjoy a smoother operation with the ability to adjust the shuttle sensitivity. Adjust the setting based on weight of loads and choose how aggressive the transmission shifts between forward and reverse for maximum efficiency.
Specs
- Model
- Model name
- M6-131-1
- Power take off (PTO)
- Type
- Live-independent PTO, hydraulically operated wet clutch, w/ PTO brake
- Low range
- Rated engine speed
- 540 rpm / 540 rpm
- High range
- Rated engine speed
- 1000 rpm / 1000 rpm
- Drive train/transmission
- Range gear shift
- 3-speed mechanical shift with clutch button
- Shuttle
- Microprocessor-controlled electro-hydraulic shuttle
- Brake type
- Hydraulically operated wet disc brakes, with automatic front axle engagement
- Max. traveling speed
- 24.3 mph / 39.1 km/h
- Main gear shift
- 8-speed powershift
- Bi-speed turn
- Standard
- Main clutch diameter
- 5.2 in / 133 mm
- Front wheel drive system
- Bevel gear type, on-the-go electro-hydraulic engagement, w/ electro-hydraulic front differential loc
- Clutch type
- Main clutch
- Multiple wet disc, electro-hydraulically operated
- Number of speeds
- Forward
- 24
- Reverse
- 24
- Number of speeds (optional)
- Creep (forward)
- 32
- Creep (reverse)
- 32
- Main gear shift
- Type
- Intelli-Shift transmission
- Optional
- Creep speed
- 0.46 mph / 0.74 km/h
- Hydraulic system
- 3-Point hitch
- Category
- II
- Control system
- Electronic draft control, lower link sensing, left fender-mounted hitch switch standard
- Steering type
- Hydrostatic power steering
- Number of
- Remote valves
- 2 standard (3rd, 4th optional) w/ built-in flow control
- Lift capacity
- At 24 in. behind lift point SAE
- 6834 lb / 3100 kg
- At 24 in. behind lift point OECD
- 5732 lb / 2600 kg
- Pump Output
- Hitch & remote
- 20.4 gpm / 77.2 l/min
- Power steering
- 14.5 gpm / 54.8 l/min
- CAB features
- Seat type
- Swivel, reclining, full adjustment (height, weight, fore & aft.), arm rests, retractable seat belt
- Operator area
- ISO-mounted flat deck, hanging pedals, tilt & telescopic wheel
- Lighting
- 2 headlights, 4 front working lights, 2 rear working lights, 2 tail lights, 4 safety flashers
- Standard
- Heater/Air conditioner, sun visor, front wiper/washer, rear wiper/washer, beverage holder, 12V. 30 A
- Dimensions and weight
- Crop clearance
- 22.2 in / 565 mm
- Overall height
- 113.2 in / 2875 mm
- Overall length
- 171.7 in / 4360 mm
- Wheelbase
- 105.9 in / 2690 mm
- Weight
- 10880 lb / 4935 kg
- Overall width
- (min. tread)
- 85.8 in / 2180 mm
- Tread width
- Front
- 69.9 in / 1775 mm
- Rear
- 62.6 in / 1590 mm
- Turning radius
- Without brake
- 13.8 ft / 4.2 m
- Engine
- Alternator
- 130 A / 130 A
- Fuel tank capacity
- 50.2 gal / 190 l
- Displacement
- 374 cu. in. / 6124 cc
- PTO horsepower
- 104 HP / 78 kW
- Engine net horsepower @ rpm
- 123.2 HP / 91.9 kW
- Engine gross horsepower @ rpm
- 131.6 HP / 98.1 kW
- Rated engine speed
- 2200 rpm / 2200 rpm
- Make
- Kubota
- Exhaust / muffler
- Under-hood, corner-post exhaust pipe
- Stroke
- 5.51 in / 140 mm
- Bore
- 4.65 in / 118 mm
- Aspiration
- Turbocharger with intercooler
- Air pre-cleaner
- 10" Dry, dual-element
- Type
- Common Rail System, direct injection, liquid-cooled
- Model
- V6108 – TI – CRS
- Number of
- Cylinders
- 4
- Electrical
- Battery
- 160 A / 160 A
- Fluid capacities
- DEF tank capacity
- 4.2 gal / 16 l
- Tires
- Standard
- Front
- 14.9 R24
- Rear
- 18.4 R38
- Other
- Optional
- 80" wide axle kit, 3-point high capacity lift cylinders, front weight bumper for 12 weights, front w
Downloads
- Brochures